BSS84P SIPMOS Small-Signal-Transistor Feature Product Summary * P-Channel * Enhancement mode * Logic Level * Avalanche rated * dv/dt rated VDS RDS(on) ID -60 V 8 W -0.17 A PG-SOT-23 3 * Qualified according to AEC Q101 2 * Halogen-free according to IEC61249-2-21 1 Type Package Tape and Reel BSS84P PG-SOT-23 H6327:3000pcs/r. YBs BSS84P PG-SOT-23 H6433:10000pcs/r. YBs VPS05161 Drain pin 3 Marking Gate pin1 Source pin 2 Maximum Ratings, at TA = 25 C, unless otherwise specified Parameter Symbol Continuous drain current ID Value A TA=25C -0.17 TA=70C -0.14 I D puls Pulsed drain current Unit -0.68 TA=25C mJ EAS 2.6 Avalanche energy, periodic limited by Tjmax EAR 0.036 Reverse diode dv/dt dv/dt -6 Gate source voltage VGS 20 V Power dissipation Ptot 0.36 W -55... +150 C Avalanche energy, single pulse ID=-0.17 A , VDD=-25V, RGS=25W kV/s IS=-0.17A, VDS=-48V, di/dt=-200A/s, Tjmax=150C TA=25C Operating and storage temperature IEC climatic category; DIN IEC 68-1 ESD Class JESD22-A114-HBM Rev 2.7 T j , Tstg 55/150/56 Class 0 Page 1 2011-07-11 BSS84P Thermal Characteristics Parameter Symbol Values Unit min. typ. max. - - 200 @ min. footprint - - 350 @ 6 cm 2 cooling area 1) - - 300 Characteristics Thermal resistance, junction - soldering point RthJS K/W (Pin 3) SMD version, device on PCB: RthJA Electrical Characteristics, at TA = 25 C, unless otherwise specified Parameter Symbol Values Unit min. typ. max. V(BR)DSS -60 - - VGS(th) -1 -1.5 -2 Static Characteristics Drain-source breakdown voltage V VGS=0, ID =-250A Gate threshold voltage, VGS = VDS ID=-20A Zero gate voltage drain current A I DSS VDS=-60V, VGS=0, TA =25C - -0.1 -1 VDS=-60V, VGS=0, TA =125C - -10 -100 I GSS - -10 -100 nA RDS(on) - 8 12 W RDS(on) - 5.8 8 Gate-source leakage current VGS=-20V, VDS=0 Drain-source on-state resistance VGS=-4.5V, ID=-0.14A Drain-source on-state resistance VGS=-10V, ID=-0.17A 1Device on 40mm*40mm*1.5mm epoxy PCB FR4 with 6cm (one layer, 70 m thick) copper area for drain connection. PCB is vertical without blown air. Rev 2.7 Page 2 2011-07-11 BSS84P Electrical Characteristics, at TA = 25 C, unless otherwise specified Parameter Symbol Conditions Values Unit min. typ. max. 0.065 0.13 - S pF Dynamic Characteristics Transconductance gfs VDS2*ID*RDS(on)max , ID=-0.14A Input capacitance Ciss VGS=0, VDS=-25V, - 15 19 Output capacitance Coss f=1MHz - 6 8 Reverse transfer capacitance Crss - 2 3 Turn-on delay time td(on) VDD=-30V, VGS=-4.5V, - 6.7 10 Rise time tr ID=-0.14A, RG=25W - 16.2 24.3 Turn-off delay time td(off) - 8.6 12.9 Fall time tf - 20.5 30.8 - 0.25 0.37 - 0.3 0.45 - 1 1.5 V(plateau) VDD=-48V, ID=-0.17A - -3.42 - IS - - -0.17 A - - -0.68 ns Gate Charge Characteristics Gate to source charge Qgs Gate to drain charge Qgd Gate charge total Qg VDD=-48V, ID=-0.17A VDD=-48V, ID=-0.17A, nC VGS=0 to -10V Gate plateau voltage V Reverse Diode Inverse diode continuous TA=25C forward current Inv. diode direct current, pulsed ISM Inverse diode forward voltage VSD VGS=0, IF=-0.17A - -0.93 Reverse recovery time trr VR=-30V, IF=lS, - 23 34 ns Reverse recovery charge Qrr diF/dt=100A/s - 10 15 nC Rev 2.7 Page 3 -1.24 V 2011-07-11 BSS84P 1 Power dissipation 2 Drain current Ptot = f (TA) ID = f (TA) 0.38 parameter: VGS 10 V BSS 84 P BSS 84 P -0.18 W A 0.32 -0.14 -0.12 0.24 ID P tot 0.28 -0.1 0.2 -0.08 0.16 0.12 -0.06 0.08 -0.04 0.04 -0.02 0 0 20 40 60 80 100 120 C 0 0 160 20 40 60 80 100 120 TA 3 Safe operating area 4 Transient thermal impedance ID = f ( VDS ) ZthJA = f (tp ) parameter : D = 0 , TA = 25 C parameter : D = tp /T 1 BSS 84 P -10 10 3 A 0 10 2 Z thJA tp = 170.0s /I D -10 BSS 84 P K/W ID -10 160 C TA = -1 RD o S( VD 1 ms S 10 1 n) D = 0.50 10 ms 0.20 0.10 -10 -2 10 0 0.05 single pulse 0.02 DC -10 -3 -1 -10 -10 0 -10 1 V 0.01 -10 2 s 10 4 tp VDS Rev 2.7 10 -1 -5 -4 -3 -2 -1 0 1 2 10 10 10 10 10 10 10 10 Page 4 2011-07-11 BSS84P 5 Typ. output characteristic 6 Typ. drain-source on resistance ID = f (VDS) RDS(on) = f (ID) parameter: Tj = 25 C parameter: VGS ; Tj = 25 C BSS 84 P Ptot = 0.36W A 26 l k j i W h VGS [V] g a -2.5 -0.32 f ID -0.28 e -0.24 -3.5 d -4.0 e -4.5 f -5.0 -5.5 h -6.0 i -6.5 j -7.0 k -8.0 c -0.12 l a b c d e f 18 16 14 12 10 h i 8 -10.0 j k 6 l 4 V GS [V] = -0.04 2 a -0.5 -1 -1.5 -2 -2.5 -3 -3.5 -4 V 0 0 -5 a b c d e f -2.5 -3.0 -3.5 -4.0 -4.5 -5.0 g h i j -5.5 -6.0 -6.5 -7.0 ID 7 Typ. transfer characteristics 8 Typ. forward transconductance ID = f ( VGS ); |VDS | 2 x |ID | x RDS(on)max gfs = f(ID) parameter: Tj = 25 C 0.4 0.16 A S 0.3 0.12 g fs - ID parameter: Tj = 25 C 0.25 0.1 0.2 0.08 0.15 0.06 0.1 0.04 0.05 0.02 1 2 3 4 V 0 0 6 0.04 0.08 0.12 0.16 A 0.22 -ID - VGS Rev 2.7 k l -8.0 -10.0 -0.04 -0.08 -0.12 -0.16 -0.2 -0.24 -0.28 -0.32 A -0.38 VDS 0 0 g 20 b -0.08 0 0 -3.0 c d g -0.2 -0.16 b BSS 84 P 22 R DS(on) -0.4 Page 5 2011-07-11 BSS84P 9 Drain-source on-state resistance 10 Typ. gate threshold voltage RDS(on) = f (Tj ) VGS(th) = f (Tj ) parameter : ID = -0.17 A, VGS = -10 V parameter: VGS = VDS 21 W BSS 84 P 2.4 V 18 98% 16 - V GS(th) R DS(on) 2 14 12 1.8 1.6 1.4 10 98% 1.2 8 4 0.8 2 0.6 -20 20 60 2% 1 typ 6 0 -60 typ. C 100 0.4 -60 180 -20 20 60 100 TA C 160 TA 11 Typ. capacitances 12 Forward character. of reverse diode C = f (VDS) IF = f (VSD) parameter: VGS =0, f=1 MHz parameter: Tj , tp = 80 s 10 2 -10 0 BSS 84 P A pF Ciss C IF -10 -1 Coss 10 1 -10 -2 Tj = 25 C typ Crss Tj = 150 C typ Tj = 25 C (98%) Tj = 150 C (98%) 10 0 0 5 10 V 20 -0.4 -0.8 -1.2 -1.6 -2 -2.4 V -3 VSD - VDS Rev 2.7 -10 -3 0 Page 6 2011-07-11 BSS84P 13 Typ. avalanche energy 14 Typ. gate charge EAS = f (TA), parameter: VGS = f (QGate ) ID = -0.17 A , VDD = -25 V, RGS = 25 W parameter: ID = -0.17 A pulsed; Tj = 25 C 3 -16 BSS 84 P V mJ V GS E AS -12 2 1.5 -10 0,2 VDS max 0,8 VDS max -8 -6 1 -4 0.5 -2 0 25 45 65 85 105 125 C 165 0 0 0.2 0.4 0.6 0.8 1 1.2 nC 1.5 QGate TA 15 Drain-source breakdown voltage V(BR)DSS = f (TA) BSS 84 P -72 V (BR)DSS V -68 -66 -64 -62 -60 -58 -56 -54 -60 -20 20 60 100 C 180 TA Rev 2.7 Page 7 2011-07-11 BSS84P W Published by Infineon Technologies AG 81726 Munich, Germany (c) 2010 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev 2.7 Page 7 2011-07-11